Foxflash Master ECU TCU Programmer with OBD BDM JTAG Support

FoxFlash Super Strong ECU TCU Clone Chip Tuning tool V1.4.2 software firmware version FW:D087 with Supports VR Reading

Highlights:

1. 100% Original
2. Master version

3. Full protocols open
4. Support Types: CAR, TRUCK, MOTORBIKE, TRACTOR, BOAT, Additional TCU package available for Automatic Transmissions.
5. Support Five Mode: OBD, BENCH, JTAG, BOOT, BDM

6. VR read online work( some ecu need use our VR system , tool auto connect to our server download file )

7. ECU can be restore to original if your ecu was damage or meet some bad tuning , use our tool can restore to original

8. Free update. No subscription, no annual fee
9. No VPN needed.Professional Online support, Faster server (1000M/S),.
10. Supports WiFi hotspot,convenient for outdoor work

11. Auto checksum

12. Online tech support

13. Help desk and tuner account

14. ECU and TCU connect wires with pdf

15. ECU and TCU connect wires with pdf
16. Special functions
17. Auto support eeprom and flash checksum
18. Support MEDC17 free clone service(most of others tool need patch the files after read out,but ours is free)
19. Two Years Warranty

20. Excellent technical support
21. Software can be download on official website (contact us get it )

22. Support Multi-language:Italian, English, German, French, Spanish, Polish, Portuguese, Czech, Romanian, Turkish

FoxFlashR Software Compatible Operating Systems:
Windows 7
Windows 8/8.1
Windows 10
Windows 11
Recommended minimum requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits

FoxFlashR Manager App V1.3.0:
The manager has been improved, and the foxflash tool can now be used on a total of 6 computers without unbundling.

We strongly recommend users to use online mode. The reasons are as follows:
1. We can help you check if your file is correct online.
2. The autochecksum can work online check too.
3. It is safer.
4. The online mode can check if your modifying is correct. If not, we can help to solve the problem.
5. The online mode can auto VR read and write from our server, which mean you can get the original file, and we can help you recover or save your broken ecu.


BTW, if you want to go out or work outside with our tool, just use your phone to turn on a hotpot, ours tool can work with hotpot. You will NOT need any VPN, for we have a wordwide server. No matter where you are, you can connect us.

The online work is easier and safer. Please do NOT let your ecu become a brick without using the online mode.

Compatibility
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.

Please note that foxFlash can help you select the right protocol with its auto-detection feature during identification on most control units.

FoxFlashR Support Types:
1. CAR
2. TRUCK
3. MOTORBIKE
4. TRACTOR
5. BOAT
6. Additional TCU package available for Automatic Transmissions.

Support Five Modes and Full System

1. OBD mode:(read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )

2. BENCH mode:we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.

3. Jtag mode:open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write.

4. Boot mode:open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.

5. Full system:you can read and write by pinout for most of ecu and tcu.

6. BDM mode:some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it.

Multiple Connection Methods:

1.Bench mode

2.Full system mode

3.Boot mode:

4.BDM mode

5.Gear box mode:

port
1pc x online chat support for use

Extra pacakge according users request after user order and get the tool ,users can request these from foxFlash team
1pc x tuner account
1pc x helpdesk

PCB display:

Suitcase